Loading ...
Loading ...
Loading ...
29
LIQUEFIED PETROLEUM GAS CONVERSION
Manifold applied sealant or
wrapped with PTFE tape
The rear pressure
regulating valve tightens
in the direction of the
arrow
LPG Conversion (Continued)
2.) Convert burners for LPG / Propane gas. Take extra care when handling orifice parts,
making sure the orifice is not damaged.
a. Remove top grates, burner caps and inner burner rings.
b. Lift off outer burner heads and burner bases.
c. Remove the factory-installed natural gas orifices from the center of the orifice
holders using a 7mm nut driver. NOTE: Do not over tighten the orifices, and keep the
orifices clean.
c.1: Replace the 18000 BTU burner orifice in each with orifice size 1.24 mm
c.2: Replace the 12000 BTU burner orifice in each with orifice size 1.00 mm
c.3: Replace the 9000 BTU burner orifice in each with orifice size 0.90 mm
c.4: Replace the 6000 BTU burner orifice in each with orifice size 0.70 mm
d. Put the burner flame ring back to the main burner bases.
e. Put back the inner burner rings, burner caps and grates.
NOTE: Use this process when converting unit back to NG; keep the original NG orifices
for future conversions back to NG.
Loading ...
Loading ...
Loading ...