Loading ...
Loading ...
Loading ...
24
Cleaning the Control knobs
Make sure all surface burner knobs are in OFF position.
1.) Grasp each knob and pull straight up to remove.
2.) Clean the knobs with soft cloth and warm, soapy water. Then rinse and dry them
thoroughly.
3.) Clean the stainless steel surfaces using stainless steel cleaner.
4.) Re-attach the knobs in the OFF position to the control valve stems.
5.) Do not remove spill protector.
CAUTION
• Do not clean the control knobs in a dishwasher.
• Do not spray cleansers directly onto the control panel. Moisture entering the electric circuits
may cause electric shock or product damage.
Cleaning Burner grates and components
Turn OFF all surface burners and make sure they have all cooled down.
1.) Remove the burner grates.
2.) Remove the burner caps from the burner heads.
3.) Remove the burner heads from the valve manifolds to reveal the starter electrodes.
4.) Clean all removable grates and burner components in warm, soapy water. Do not use
steel-wool pads or abrasive cleaners.
5.) Rinse and dry grates and burner components thoroughly.
6.) Return the burner heads to their positions on top of the manifold valves. Make sure a
starter electrode is inserted through the hole in each burner head burner component re-
assembly instructions.
7.) Return the burner caps to their positions on top of the burner heads. To ensure proper
and safe operation, make sure the burner caps lie flat on top of the burner heads.
8.) Re-install the burner grates in their respective positions.
9.) Turn on each burner and check if it operates properly. After verifying that a burner
operates normally, turn it off.
CARE & MAINTENANCE
!
Loading ...
Loading ...
Loading ...