Febo Flame F18-I-008-018C - 62-in W Walnut Infrared Quartz Electric Fireplace

User Manual - Page 15

For F18-I-008-018C.

PDF File Manual, 39 pages, Read Online | Download pdf file

F18-I-008-018C photo
Loading ...
Loading ...
Loading ...
15
7.
Timer:
Press and hold the button for 1.5 seconds
to activate or deactivate the timer function. The default
state is 0.5 hour. Press the Timer button continually on
the control panel, or press UP or DOWN button on the
remote control to adjust the timer. The choices are 0.5H,
between 1H to 8H with 1H interval. Once the TIMER is
on and the desired setting is reached, the system will
shut down.
OPERATING INSTRUCTIONS
7
6
6.
Heater:
Press and hold the button for 1.5 seconds to
activate or deactivate
the heater function. The system
will start the default temperature setting at 80°F/27°C.
There are 7 adjustable heat levels, ranging from
90°F/32°C to 60°F/16°C. Press the button again to adjust
the heat levels, or press the UP or DOWN button on
the remote control to adjust the levels, noting each level
increases or decreases the temperature by 5°F. When
the heater is on, digital display screen will show the
setting temperature corresponding numbers. And when
this feature is off, the inner blower will continue to run
for additional 1 minutes to cool down the unit in order to
protect the heating elements before the unit completely
shuts off.
Note:
You can switch the temperature display from
Fahrenheit to Celsius by pressing and holding the
HEATER button on the remote control for approximately
3 seconds. Without any further operation, the digital
display screen will show room temperature after 15
seconds. Then there is no display after 5 more seconds.
Loading ...
Loading ...
Loading ...