Loading ...
Loading ...
Loading ...
!
EN
23
! The running programme will be cancelled
and all the programme indicator lights will flash
.
! At this point a new programme can be set.
When a programme is running the relevant
indicator light will remain on and the 3
"PROGRAMME STATUS" indicator lights:
WASH
RINSE
DRY
will light singularly and in sequence to
indicate the current phase.
If there is any break in the power supply
while the dishwasher is operating, a
special memory stores the selected
programme and, when the power is
restored, it continues where it left off.
A 5 second buzzer will sound (if not muted)
3 times at 30 second intervals to signal that
the programme has ended.
The option buttons provide you with further
wash options, allowing you to customise the
wash programmes (see the table in chapter
17 for a list of programmes on which each
option can be enabled). Options are
enabled (or disabled) before starting the
programme, using the appropriate buttons.
The relevant indicator lights will appear (or
disappear) on the display. The option button
should be enabled after you have chosen
the wash programme.
"Express" button
This button enables average energy and
time savings of 25% (according to the cycle
selected), reducing the wash water
temperature and the drying time during the
final rinse. This option is recommended for
evening washing when perfectly dry dishes
are not needed immediately.
For better drying, leave the dishwasher
door slightly ajar to promote natural air
circulation in the dishwasher.
This model is provided with an indicator
light on the control panel that lights up when
the salt needs to be topped up. The
appearance of whitish stains on dishes is
generally a warning sign that the salt
container needs filling.
After filling the salt container, you should
press this button for a few seconds, until the
corresponding indicator light switches off.
WARNING:
Before starting a new programme, you
should check that there is still detergent
in the dispenser. If necessary, top up the
dispenser.
Programme operations.
Programme end
Option buttons
If an option is selected that is not
compatible with the selected programme
then the option indicator light first flashes
and then goes off.
"NO SALT" indicator light
"RESET" button for "NO SALT"
indicator light
WARNING:
If you press the reset button without
filling the salt container, this will
interfere with the correct functioning of
the salt indicator light.
In order to guarantee the correct
functioning of the salt indicator light,
YOU MUST ALWAYS FULLY REPLENISH
THE SALT CONTAINER.
Loading ...
Loading ...
Loading ...