Loading ...
Loading ...
Loading ...
4 49-5000430 Rev. 4
ENGLISH
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, electric
shock or personal injury.
•
Use this appliance only for its intended purpose as
described in this Owner’s Manual.
•
This dehumidifier must be properly installed and grounded
as described in this manual before it is used.
•
Never operate this dehumidifier in an area that is likely to
accumulate standing water. If this condition develops, for
your safety disconnect the power supply before stepping
into the water.
•
Never unplug your dehumidifier by pulling on the power
cord. Always grip plug firmly and pull straight out from the
receptacle.
•
Immediately replace all electric service cords that have
become frayed or otherwise damaged. A damaged power
supply cord must be replaced with a new power supply cord
obtained from the manufacturer and not repaired. Do not
use a cord that shows cracks or abrasion damage along its
length or at either the plug or connector end.
•
If the receptacle does not match the plug, the receptacle
must be changed out by a qualified electrician
•
If the SUPPLY CORD is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person
in order to avoid a hazard.
•
The appliance shall be installed in accordance with national
wiring regulations.
•
Turn the dehumidifier OFF and unplug it before cleaning.
•
Haier does not support any servicing of the dehumidifier.
We strongly recommend that you do not attempt to
service the dehumidifier yourself.
•
For your safety, do not store or use combustible materials,
gasoline or other flammable vapors or liquids in the vicinity
of this or any other appliance.
•
All dehumidifiers contain refrigerants, which under federal
law must be removed prior to product disposal. If you are
getting rid of an old product with refrigerants, check with
the company handling disposal about what to do.
•
Do not use outdoors.
•
This dehumidifier is intended for indoor residential
applications only. This dehumidifier should not be used for
commercial or industrial applications.
•
These R410A Dehumidifier Systems require contractors
and technicians to use tools, equipment and safety
standards approved for use with this refrigerant. DO NOT
use equipment certified for R22 refrigerant only.
•
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand
the hazards involved.
WARNING
USE OF EXTENSION CORDS
RISK OF FIRE. Could cause serious injury or death.
•
DO NOT use an extension cord with this Dehumidifier.
•
DO NOT use surge protectors or multi-outlet adaptors
with this Dehumidifier.
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the third
(ground) prong from the power cord. For personal safety, this
appliance must be properly grounded.
DO NOT use an adapter plug with this appliance.
The power cord of this appliance is equipped with a 3-prong
(grounding) plug which mates with a standard 3-prong
(grounding) wall outlet to minimize the possibility of electric
shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a 2-prong wall outlet is encountered, it is your
personal responsibility and obligation to have it replaced with
a properly grounded 3-prong wall outlet.
The dehumidifier should always be plugged into its own
individual electrical outlet, which has a voltage rating
matching the rating plate.
This provides the best performance and also prevents
overloading house wiring circuits, which could cause a fire
hazard from overheated wires.
RECYCLING INFORMATION
For appliance recycling information please visit www.geappliances.com/recycling.
SAFETY INFORMATION
Loading ...
Loading ...
Loading ...