Loading ...
Loading ...
Loading ...
5
SAFETY AND WARNINGS
Lint
z
Accumulated lint in the dryer can become a fire hazard; it also reduces the efficiency
of the dryer by causing longer drying times and increased power consumption.
z
Clean the lint filter before every load.
z
Ensure the area around the dryer is clear of lint.
z
At regular intervals have the interior of the dryer cleaned of any accumulated lint.
This must be done by a Fisher & Paykel trained and supported service technician.
This must be done when the dryer installation is changed from free standing.
z
The dryer exhaust ducting should be inspected and cleaned periodically to remove
accumulated lint.
z
If the lint filter becomes damaged, contact your Fisher & Paykel trained and
supported service technician to arrange getting a new filter. Do not operate your
dryer with a damaged lint filter or without the filter in place, as this will cause damage
to your dryer.
Installation
z
The dryer must be installed in a well-ventilated, dust-free environment.
z
The dryer must not be installed on any textured floor coverings (eg carpet, rugs) to
ensure that openings at the base of the machine are not obstructed.
z
Do not install the dryer behind a lockable door, sliding door, or behind a door where
the hinge is on the opposite side to that of the dryer in such a way that the full
opening of the door is inhibited. Ensure the dryer door can always be opened fully.
z
Please refer to INSTALLATION INSTRUCTION section of this document for detailed
installation steps.
Loading ...
Loading ...
Loading ...