Loading ...
Loading ...
Loading ...
27
TROUBLESHOOTING
The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
please contact your Fisher & Paykel trained and supported service technician.
PROBLEM POSSIBLE CAUSES WHAT TO DO
Pressing
does not turn
on the dryer.
Electrical cord not plugged
into a power socket.
Plug cord into a power socket.
Power switch not switched on. Switch power on.
Fault with household power
supply.
Try plugging another electrical
appliance into the same socket. Turn
off the power at the power point.
Unplug the dryer from the power
socket. Wait 60 seconds, plug it
back in, turn it on and try again.
Dryer does not
heat.
Dryer set to ‘Air Dry’ cycle.
Check what cycle the dryer is set
to (refer to page 18). Change to
preferred cycle.
Full water tank.
Empty the water tank (refer to page
23).
The dryer has progressed to
‘Cool’.
Check the progress lights – are the
‘Cool’ and ‘End’ lights illuminated?
Refer to page 19.
Touching
does not start
the drying cycle.
not touched firmly enough. Touch again.
Dryer is paused.
light will be flashing. Touch to
resume the cycle.
Dryer door not closed
properly.
Open and reclose the door.
Is the dryer displaying a user
warning or fault code?
Refer to 25 and26.
Water tank full or not properly
in place.
Empty the water tank (refer to page
23). Ensure the water tank is
properly in place.
Lint filter needs to be
emptied.
Empty the lint filter and ensure it is
correctly in place.
Dryer is overloaded. Remove some items from the dryer.
‘Delay Start’ function is set.
Refer to page 21 for more
information.
Loading ...
Loading ...
Loading ...