Loading ...
Loading ...
Loading ...
16
11. Fit the bottom hinge and
tighten the screws as
shown in figure. (10)
12. Fit the other front feet as
shown in figure. (11)
13. Rotate the top hinge 180°.
Unscrew the hinge pin and
re-tighten it to the opposite
side. (12)
14. Fit the top hinge on the left
hand side bushing of the
door. (13)
15. Locate and re-fit door to
bottom hinge pin. (14)
16. Re-fit the upper hinge on
the opposite side by using
a flat headed screwdriver.
(15)
17. Fit front top panel plastic
hinge covers on the
opposite sides. (16)
18. Remove the handle cover
gently taking care not to
damage the appliance.(17)
19. Unscrew and remove the
handle (18). Do not unscrew
the yellow coloured screws!
20. Rotate 180 degrees and fit
handle to the other side
after removing hole plugs
gently.(19,20)
21. Fit the handle cover.(21)
22. Adjust the two front feet if
necessary.
23. Check that door opens and
closes easily, it is aligned
correctly and there are no
gaps allowing air into the
cabinet. If there are gaps
between the door seal
and the cabinet, adjust the
door seal by gently pulling
away from the door using
fingers.
24. Check that all the hinge
screws are tightened. Avoid
over tightening the screws.
25. Put all items, fittings back
in the appliance.
26. Wait for at least 4 hours to
allow the system to settle
before switching on.
27. Once the correct storage
temperatures have been
reached in the appliance,
put back all the food.
Loading ...
Loading ...
Loading ...