VIDEOBAR VB1 User Manual

Loading ...

|

REGULATORY INFORMATION

Product Power State Table

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is

in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information Power Modes

Standby Networked Standby

Power consumption in speciﬁed power

mode, at 230V/50Hz input

<0.5W Wi-Fi, Ethernet,

Bluetooth

<2.0 W

Time after which equipment is automatically

switched into mode

<2.5 hours <20 minutes

Power consumption in networked standby

if all wired network ports are connected and

all wireless network ports are activated, at

230V/50Hz input

<2.0 W <2.0 W

Network port deactivation/activation

procedures. Deactivating all networks will

enable standby mode.

Wi-Fi: Deactivate by restoring the factory default settings: Press

and hold the Home and Autoframe buttons on the remote control

simultaneously for 5seconds, or press and hold the Mute and

Bluetooth

buttons on the side of the unit simultaneously for

5seconds. Activate via Bose Work application.

Ethernet: Deactivate by removing the Ethernet cable. Activate by

inserting the Ethernet cable.

Bluetooth

: Deactivate by restoring the factory default settings:

Press and hold the Home and Autoframe buttons on the remote

control simultaneously for 5seconds, or press and hold the Mute

and

Bluetooth

buttons on the side of the unit simultaneously for

5seconds. Activate by pairing with a

Bluetooth

source.

External Power Supply Technical Information

The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy

Related Products Directive 2009/125/EC, is in compliance with the following norms(s) or documents(s): Commission

Regulation (EU) 2019/1782.

Manufacturer Bose Products B.V.

Commercial registration number 36037901

Address Gorslaan 60

1441 RG Purmerend

The Netherlands

Model identiﬁer DT24V-1.8C-DC

Input voltage 100V–240V

Input AC frequency 50Hz/60Hz

Output voltage 24VDC

Output current 1.9A

Output power 45W

Average active eciency 89.9%

Eciency at low load (10%) 87.0%

No-load power consumption 0.07W

Loading ...

User Manual - Page 6