User Guide



LENRUE A2 will automatically turn off after 5 minutes if no music is played.

Switch Aux or SD card mode when pluging in an audio cable or inserting SD card.

Rapidly flashing blue
Steady blue
Pairing mode
Connected to a device
When turned on. LENRUE A2 will automatically connect to the last connected device if available. If not. LENRUE A2 will enter pairing mode.
To pair a different device. first disable Bluetooth on the connected device or press multifunction button for 2s to re-enter pairing mode. Then repeat the pairing steps.
Having connection problems? Remove LENRUE A2 from your device's Bluetooth history. ensure it's less than 1 meter away then try pairing again.

When using AUX mode. control audio playback via the connected device.

Support a class 4 or above micro SD card, up to 32G
Supported audio formats: MP3, MA, AV etc.

Steady red
OFF
Charging
Full charged
LENRUE A2 will beep every 5 minutes when the battery is low. After 3 times. the LENRUE A2 will turn off automatically.
Un-pair connected device and re-enter pairing mode
Play/pause
Play next/previous
Volume up/down
Answer/end call
Reject call
Specifications are subject to change without notice.
Input - 5V/1A
Charging Time - 2,5 hours
Play Time (varies by volume level and content) - >= 4 hours
Size - 72 X48 xX72mm
Weight - 167g
Range - 10m/33ft
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and(2) This device must accept any interference received. including interfere nce that may cause undesired operation.
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.