Loading ...
Loading ...
Loading ...
P5
3. USING YOUR CLEANER
3.1 UPRIGHT MODE
STEP 1:
Plug the power cord into the socket.
Place your foot onto the nozzle and pull the handle
backwards to your desired operating level.
STEP 4:
Adjust the suction by moving the SUCTION
REGULATOR left or right.
CARPET SETTING: Minimum suction level for
long pile carpets or rugs.
HARD FLOOR SETTING: maximum suction level
for hard oors or short pile carpets.
It can also be used to reduce the operating
push force
STEP 5:
Turn your cleaner o by pressing the ON/OFF
button. Remove the plug from the power
socket and wind the power cable around the
the cord storage hook upper and lower.
STEP 2:
Press the ON/OFF button to operate your
cleaner.
STEP 3:
Press the BRUSHBAR ON/OFF button to
activate the brush bar.
Brushbar ON is recommended for carpets.
Brushbar OFF is recommended for hard oors
and deep pile rugs.
To avoid damaging the
power cord during use,
t the power cord into
the cord clip on the
handle.
Loading ...
Loading ...
Loading ...