Loading ...
Loading ...
Loading ...
8
|
Sub-Zero Customer Care 800.222.7820
Maintenance
WATER FILTER REPLACEMENT
The water lter should be replaced every six months, after
a prolonged shutdown or after 8000 ice making cycles.
‘REPLACE FILTER’ will illuminate on the control panel
indicating the water lter needs to be replaced. The ice
machine bypasses the lter when it is removed, so the water
supply does not need to be turned off.
Replacement Sub-Zero water lters can be ordered online
at subzerowolfstore.com. For questions, contact Sub-Zero
customer care at 800-222-7820.
IMPORTANT NOTE: Poor water quality may require more
frequent water lter replacement.
To replace water lter:
1 To remove the water lter, rotate one-quarter turn
counterclockwise and the lter will pop out. Refer to the
illustration below.
2 Reverse the process to install the new lter.
3 Touch and hold ‘CLEAN’ for 6 seconds to reset the
indicator.
Water lter location.
WATER
FILTER
Cleaning
CONDENSER CLEANING
CAUTION
Before cleaning the condenser, turn power off at the
control panel. Wear gloves to avoid injury from sharp
condenser ns.
The condenser is located behind the kickplate. To access,
remove the kickplate. Use a soft bristle brush and vacuum
to remove dust and lint from the condenser. Clean the con-
denser every six months. Refer to the illustration below.
IMPORTANT NOTE: To avoid damaging condenser ns,
vacuum in the direction of the ns.
CAUTION
Failure to clean the condenser could result in tempera-
ture loss, mechanical failure or damage.
Condenser location.
CONDENSER
CARE RECOMMENDATIONS
Loading ...
Loading ...
Loading ...