Loading ...
Loading ...
Loading ...
– 4
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service centre.
Please submit the proof of purchase.
The adhesive type label must not be removed from the
device. Warranty is no longer granted if the label is re-
moved.
The packaging material can be recycled.
Please do not place the packaging into the or-
dinary refuse for disposal, but arrange for the
proper recycling.
Old appliances contain valuable materials that
can be recycled. Please arrange for the proper
recycling of old appliances. Please dispose
your old appliances using appropriate collec-
tion systems.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
1 Carrying handle
2 Power cord with plug
3 Lock (float switch)
4 Swimmer switch
5 Quick-Connect
6 Automatic venting device
7 Connection nozzle (1¼“ hose connection and G1
thread)
This appliance has been designed for use in private
households and is not intended for commercial use.
The manufacturer is not responsible for any damages
that may occur on account of improper use or wrong op-
erations.
The device is mainly intended for draining building parts
in case of flooding, but also for pumping over or out con-
tainers, for water removal from wells and shafts as well
as for draining water from boats and yachts, provided
that it is fresh water.
NOTICE
The device is not suitable for continuous pump opera-
tion (e.g. continuous circulation in a pond) or as a sta-
tionary installations (e.g. lifting device, fountain pump).
Fresh water up to a certain degree of soiling
Water from swimming pool (provided the dosing of
additives is proper)
Washing lye
Water with a degree of contamination up to a grain
size of 20 mm
DANGER
Risk of injury, risk of damage! Caustic, slightly inflam-
mable and other explosive substances (such as petrol,
petroleum, diluted nitrogen), greases, oils, salt water
and waste water from toilets as well as sludgy water that
has a slower flow capacity than water, must not be
transported with this pump. The temperature of the de-
livered fluid must be between 5 °C and 35 °C.
NOTICE
The shorter the hose length and the larger the hose di-
ameter, the higher the pump capacity.
To prevent clogging of the pump, use a prefilter with
hose diameters of less than 1¼ “ (see special accesso-
ries).
The pump connection is equipped with a plug system
(Quick-Connect).
The unmounted connection nozzle is enclosed in the
device.
Illustration
To remove the connection nozzle, press the Quick-
Connect (grey button).
Illustration
Slide the hose clamp onto the hose.
If a ¾“ or 1“ hose is used:
Screw pump connecting piece (see special acces-
sory) onto the connection nozzle.
Slide the hose onto the pump connecting piece and
secure it by means of a hose clamp.
Slide the connection nozzle into the Quick-Connect.
If a 1¼ “ hose is used:
Slide the hose onto the connection nozzle and se-
cure by means of a hose clamp.
Slide the connection nozzle into the Quick-Connect.
Safely place the pump on a stable surface in the
feed fluid or immerse it using a rope tied to the car-
rying handle.
NOTICE
The suction area must not be blocked by soiling.
In case of muddy ground, place the pump on a brick or
the like.
Ensure that the pump is level.
Do not carry the pump on the cable or the hose.
Warranty
Environmental protection
Description of the Appliance
Proper use
Approved feed fluids
Start up
8 EN
Loading ...
Loading ...
Loading ...