Loading ...
Loading ...
Loading ...
20
I Do Not Hear Sounds from My Subwoofer
• Check that the sound bar is powered on and playing audio.
• Turn up the bass using the provided Polk remote.
• Check that the power cable is secure in the back of the subwoofer and wall outlet.
• Check that a solid green light is visible on the back of the subwoofer.
• Unplug power from the subwoofer for 30 seconds and then plug back in.
• If the light on the back of the subwoofer is flashing green, you will need to reconnect the sub-
woofer to the sound bar using the instructions below.
Pairing the Subwoofer to the Sound Bar
• Check that the sound bar is powered on. A light should be visible on the front of the sound bar.
• On the back of the sound bar, press and hold the CONNECT button for 3-5 seconds. The SUB and
SURR lights on the back of the sound bar should now be blinking green.
• On the back of the subwoofer, press and hold the CONNECT button for 3-5 seconds. The light on
the back of the subwoofer should now be solid green.
• On the back of the sound bar, press the CONNECT button to exit pairing mode.
Factory Reset
• Performing a factory reset will erase all settings in the sound bar including Bluetooth pairings
and Wi-Fi connection. To perform a factory reset, press and hold the Power button on top of
the sound bar for 15 seconds. You can release the button when you hear the factory reset sound
eect. The bar will reboot and be ready to use again in about a minute.
Loading ...
Loading ...
Loading ...