Loading ...
Loading ...
Loading ...
1. Do not disconnect any wires at this stage. We recommend taking a picture
of your wiring before proceeding for future reference.
2. Wiring colors may vary. In this diagram, neutral is white, and ground is
bare copper. The red and black wires connected to brass terminals
are traveler wires. The wires connected to the black (common) terminals
are the line and load (we’ll identify which one is which in STEP 4).
3. Both the neutral and ground wires are required for the C by GE Smart Switch.
4. If neutral wires are only in one switch location, the traveler wire will be
used to carry the neutral to the other switch (this will be explained
on STEP 7.B).
5. If all necessary wiring is present, you can proceed with installation.
STEP 2
Check For Compatible Wiring
Loading ...
Loading ...
Loading ...