Loading ...
Loading ...
Loading ...
IMPORTANT: Only the load switch will turn the light on/off until the two
smart switches are linked in the C by GE app. The dimmer buttons will
not work on either switch until the two smart switches are linked in the
C by GE app. We will handle the app setup in STEP 12.
1. Restore power to the switches at the circuit breaker box.
2. The light ring on both switches will flash blue indicating the switches are
wired correctly. If you see this, proceed to STEP 9.
3. Light ring may not illuminate if wired incorrectly.
4 The light ring will flash red if the circuit is overloaded. Max load rating
is 150W for LED and 450W for incandescent/halogen.
5. If lights don't turn on:
• Check that the air gap on the bottom of switch is fully inserted
(dimmer/motion switches only).
• Check that power to the switch is back on at the breaker.
• Turn power off at the breaker, return to the switch to confirm the wires
are securely and properly wired according to the installation guide.
STEP 8
Check For Functionality
Loading ...
Loading ...
Loading ...