Loading ...
Install Lock
1 Install latch.
Make sure latch angle faces door jamb.
OR
Actual Size
Jamb
Angle
Wood Block
(Not Included)
Angle
2 Press levers onto lever posts.
Tip points
down
3 Remove battery cover from the interior thumbturn
assembly.
Unscrew the cover and li down and out to remove.
4 Install the touchscreen on the outside of door.
Bar should slide smoothly through hole in latch. If not, check door
dimensions.
5 Install the interior lever assembly.
5a Route wire through indicated hole below.
5b Secure interior assembly with screws.
6 Connect wire and battery.
IMPORTANT!
Route wire over the latch.
Loading ...
Loading ...
Loading ...