Loading ...
Loading ...
Loading ...
User instructions
16
ENERSAVE
This option allows the further reduction of energy consumption, thanks
to the assisted drying when the door opens at the end of the cycle. At the
end of the wash, a device automatically releases the door, which slowly
opens a few centimeters. This allows the best drying possible, even at low
rinse temperature, permitting an important energy saving.
When the door is completely open, a brief sound signal indicates that the
wash cycle has ended.
Enersave is automatically activated in all programs that include a final
drying phase (see program table). It is possible to disable it before starting
the program.
If this function is active, never prevent the door from opening by any
means, clear the space necessary to allow the opening of the door. Do
not force the closure of the door before the end of cycle signal, because
this would damage the mechanism.
1/2 LOAD FLEXI ZONE
Ideal if just a few dishes need to be washed, allowing energy savings. The
dishes should be placed in both baskets and less detergent should be
placed in the detergent dispenser compared to the amount used for a full
load.
DELAY
Allows you to program the dishwasher cycle to start during the required time
period (e.g. night). Press the DELAY button to activate the option. A delay
of 1 hour is shown on the display. Pressing the button repeatedly will allow
you to select the required delay of up to 9, 12 or 24 hours depending on
the model. To cancel the setting, press the button several times until no
numbers appear on the display. The option cannot be selected once the
cycle is running. After the door has been closed, the dishwasher will carry
out a pre-wash cycle, after which the set “cycle delay” option will be
activated.
Loading ...
Loading ...
Loading ...