Loading ...
Loading ...
Loading ...
User instructions
13
PROGRAMME
NUMBER
& SYMBOL
LOAD CROCKERY AND
CUTLERY
PROGRAM
PROGRESS
DURATIO
N
CONSUMPTION
MINUTES
(1)
WATER
LITRES
POWER
kWh (1)
1 RAPID 27’
Dishes with light dirt,
washed immediately after
use
Wash at 38°C
Rinse at 50°C
27 6,5 0,70
2 NORMAL
ECO (*)
Crockery and cutlery
normally soiled
Cold prewash
Wash at 50°C
Cold rinse
Rinse at 43°C
Dry
220 9,9 0,8
3 REGULAR
Dishes with regular dirt,
even with dried-on
residues.
Wash at 55°C
Cold rinse
Rinse at
55°C or 70°C (2)
Dry
145/95
(2)
11 1,30
4 AUTO 60-70
Pans and dishes with
normal dirt, even with
dried-on residues.
When the "AUTO" program is selected, the dishwasher
recognises the type of dirt and automatically adjusts the
washing parameters as appropriate.
5 ULTRA
CLEAN
Very dirty pans and
dishes, even with dried-on
residues.
Hot prewash
Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry
155 15,5 1,70
The ULTRA CLEAN program terminate with an extra anti-bacteria rinse that ensures
a further reduction in the bacteria level. If the temperature falls during this stage of the
program (e.g. because the door is opened or due to a power blackout), the program
lights (2) flash to warn that the anti-bacteria effect is not guaranteed.
* Reference program as per AS/NZS 2007.
During the comparative tests the dishwasher shall to be setted as follow:
- ENERSAVE option DISABLED
- At
the end of the cycle
the
door
must be
open
ed
about
15 cm
.
Only
run the soak program with partial loads.
(1) The cycle duration and power consumption may vary according to the water
and room temperatures, and the type and amount of dishes.
(2) ENERSAVE option selected or not selected
ENERSAVE is activated automatically if the selected program is compatible
with the option. It can be disabled by pressing the relative button.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
Loading ...
Loading ...
Loading ...