Loading ...
Loading ...
Loading ...
To stop trickle charge:
1. Ensure that the charge connector lock is
not engaged. For additional information,
see “Charge connector lock system”
(P. CH-41).
2. Press the button on the charge connec-
tor, release the lock and remove the
charge connector from the charge port.
3. Close the charge port cap.
4. Attach the safety cap to the EVSE.
5. Remove the electrical plug from the AC
110 - 120 volt, 15A dedicated electrical
outlet.
6. Store in its case.
NOTE: Perform the following proce-
dure to store the EVSE in the case:
a. Wind the charge cable into a size that
will allow it to be stored in the case
(approximately 14 in (36 cm) in diam-
eter). Winding the charge cable in the
direction shown below avoids short-
ening of cable life.
b. Place the EVSE into the case.
LCH2105 LCH2138
CH-16 Charging
Loading ...
Loading ...
Loading ...