1.013-101.0 User Manual

Loading ...

Maintenance

Delta Q IC650 Charger Operating Instructions

Only qualified maintenance personnel are to perform the following repairs.

Seul le personnel d'entretien qualifié peut effectuer des réparations

- The charger may become hot during charging. Use hand protection to safely handle the charger during

charging.

- Extension cords must be a 3-wire cord no longer than 30m (100') at 10 AWG or 7.5m (25') at 16 AWG, per UL

guideline

1. The USB Host Port allows data to be transferred to and from the charger using a standard USB flash drive,

including the downloading of charge tracking data and updating of the charger’s software and / or charge

profiles.

2. The Charging Output Indicator means that the charger output is active, and there is a potential risk of electric

shock.

3. The Charge Profile / Error Display shows one of four possible codes to indicate different conditions:

- ‘F’ codes meaning that an internal fault condition has caused charging to stop.

- ‘E’ codes meaning that an external error condition has caused charging to stop.

- ‘P’ code meaning that the charger programming mode is active.

- ‘USB’ code meaning that the USB interface is active, and the USB flash drive should not be removed.

The ‘E,’ ‘F’ and ‘P’ codes will appear, then are followed by three numbers and a period to indicate different

conditions (e.g. E-0-0-4). “See the Charger Fault Codes” or “Charger Error Codes” sections for details on

these conditions and their solutions.

4. The Select Charge Profile Button is used to select a charge profile from those stored on the charger. Up to 25

charge profiles can be stored. See the “Selecting A Charge Profile” section for instructions.

Fault / Error / USB Indicator

Battery Charging Indicator

AC Power Indicator

USB Host Port

Charging Output Indicator

Solid red = Charger fault

See display panel for details

Flashing amber = External error condition - caution

See display panel for details

Flashing green = USB port active

Solid green = Safe to remove USB ash drive

Flashing green = Low state of charge

Solid green = High state of charge

Flashing green = High state of charge

Solid green = charge completed

Solid blue = AC power available

Charge Prole/Error Display

Select Charge Prole Button

86405760 ECO! T11 Bp LINER

Loading ...

Karcher 1.013-101.0 ECO! T11 Bp Liner Deluxe