Loading ...
Loading ...
Loading ...
7ninjakitchen.com
6 ni njakitchen.com
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
33 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
the container and lid are properly installed
before operation.
34 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
35 Keep hands and utensils out of containers
while chopping to reduce the risk of
severe personal injury or damage to
the blender/food chopper. A scraper
may be used ONLY when the blender or
processor is not running.
36 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
37 DO NOT
open the pitcher’s pour spout
cap while blender is operating.
38 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
39 DO NOT attempt to remove the container
or lid from the motor base while the
blade assembly is still spinning. Allow the
appliance to come to a complete stop
before removing lids and containers.
40 If the appliance overheats, a thermal
switch will activate and temporarily disable
the motor. To reset, unplug the appliance
and allow it to cool for approximately 30
minutes before using again.
41 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
42 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container’s contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from the
container. Failure to remove the blade
assembly before emptying the container
results in a risk of laceration.
43 If using the pitcher’s pour spout, hold the
cover in place on the container or ensure
lid lock is engaged when pouring to avoid
risk of injury.
44 Remove the Pro Extractor Blades®
Assembly from the Single-Serve Cup
upon completion of blending.
DO NOT store ingredients before or
after blending them in the cup with the
blade assembly attached. Some foods
may contain active ingredients or release
gases that will expand if left in a sealed
container, resulting in excessive pressure
buildup that can pose a risk of injury. For
ingredient storage in the cup, use only
Spout Lid to cover.
45 The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
46 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
47 DO NOT attempt to sharpen blades.
48 Turn o the appliance and unplug the
motor base before cleaning.
Loading ...
Loading ...
Loading ...