Loading ...
Loading ...
Loading ...
caso MCG 25 Chef (pure white, black) 77
Exterior housing
• Clean the exterior surfaces of the device with a damp cloth.
Rotating plate, baking sheet and rolling ring
• The glass turntable and baking sheet must be removed and cleaned
occasionally. Wash the plate in a warm soapy solution or in the
dishwasher.
• The rolling ring should be cleaned regularly to prevent excessive noise
development or a rotational malfunctions.
The rolling ring can be washed in a mild soapy solution or in the
dishwasher. Please remember to put the rolling ring back again properly
after cleaning it.
• Wipe the bottom of the oven with a mild cleaning agent. If the floor of
the oven is excessively dirty, you can use a mild cleaning agent.
13 Troubleshooting
This chapter provides you with important notices with regard to operating
the device. Observe the following notices to avoid dangers and damages:
13.1 Safety notices
Attention
► Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the
user and damages to the device.
13.2 Fault indications
In the event of a fault, an error code will appear in the display; it
describes the cause of the fault.
Error code Description
E01 Excessive temperature within cooking chamber
The overheating cut-out terminated the current program at a cooking chamber
temperature of 300°C. Press the Stop button to acknowledge this fault.
The device can be re-activated after the cool down phase.
E03 Sensor fault
The device has detected an error on a sensor and has terminated the current
programme. Press the Stop button to acknowledge this fault.
Please note
► If error messages continue to appear after an extended waiting period
and restarting the device, then the device will need to be sent to
Customer Service to be inspected.
Loading ...
Loading ...
Loading ...