Loading ...
Loading ...
Loading ...
ASSEMBLY/OPERATION
86322070 CV 02/03/09
3-3
ASSEMBLY
Please read all instructions before
using this machine.
1. Carefully attach the brush nozzle to the vacuum
cleaner through the fitting at the bottom of the
vacuum until it locks. [See below]
2. Push the black end of the hose [A] into the
connection on the filter cover [B].
3. Insert the hose handle [C] into the suction opening
on the side and press the hose into its place on
the side of the machine, as shown.
OPERATION
Your vacuum is operated with an electric power brush. The
machine can be used in the upright position.
When locking the vacuum in the
upright position, please ensure
the bag housing is clicked in place; face forward to the
center, or the unit could overturn.
Please ensure that the On/Off switch is in the OFF
position. Turn the cable hook to release the power cable
and plug into the walls main outlet.
Now you may start your machine by moving the power
switch to the ON position.
To use the power head (12” or 15” model):
1. Press the foot pedal [D] on the rear of the power
head and lower the machine handle to an angled
position. The brush motor will then turn on.
When using the hose and
attachments, keep the
machine in upright position.
The hose handle can be removed from the side
of the vacuum and can be used with or without
attachments. Also maintain a grasp on the
machine when using the hose as it could tip if
the hose is pulled too far.
The machine can also be used without the
power head. You can easily carry the machine
by using the carrying handle.
When you have finished using the machine, turn
it off by moving the power switch to the OFF
position. Then unplug the power cable and wind
it into the cable hook and handle.
! CAUTION
! CAUTION
Handle
Hose
Handle
Carrying
Handle
!
CAUTION
Loading ...
Loading ...
Loading ...