GE - General Electric MTH21GAS Legacy

User Manual - Page 4

For MTH21GAS.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TEMl?ERAiURE CONTROLS
The temperature controls in your refrigerator
The freezer control
have letters and numbers. Initially set the freezer
moves a damper to
control at “C” and the fresh food control at”5 .“
change the amount
The fresh food
of cold air that
-
control maintains
moves from the
the temperatures
5 INITIAL SETTING
freezer to the fresh
9 COLDEST
throughout the
food compartment.
FRESH FOOD
refrigerator. Moving
Damper
“OFF” stops cooling in
I
both areas-fresh food and freezer—
Cold air
n E (coldest setting)
-c II
but does not shut off power to the refrigerator.
from freezer
com~artment
%&2$& ! !
‘=3%%
(warmest setting) A c
Power Saver Switch
The power saver switch is located on the temperature
control panel.
To reduce the amount of electricity required to
operate your refrigerator, push switch to the
POWER SAVER setting.
This turns off the heater in your refrigerator that
prevents moisture from forming on the exterior of
the refrigerator.
With the heater turned off, there is a chance that
moisture may form on the outside of your refrigerator,
especially when the weather is humid.
The humidity is most likely to be high in the summer,
in the early morning hours, and in homes which are
not air conditioned.
A
Over an extended period of time, moisture that forms
on the refrigerator surface may cause deterioration of
the paint finish. It will be important to protect the
finish by using appliance polish wax as described in
the Care and Cleanin~ section.
Move the power saver switch from the POWER
SAVER setting and electricity flows through the low
wattage heater which warms the inside of the divider
between the refrigerator and freezer.Under most
conditions, this prevents the forming of moisture or
water droplets.
. .
Loading ...
Loading ...
Loading ...