Loading ...
Loading ...
Loading ...
REVERSE HARDWARE OH CABINET
~ TRAKSFER BOTTOM HINGE BRACKET
TO THE LEFT.
a.
Remove the base grille. Grasp it at the bottom
and pull it straight out.
Tl
49
\
b. Using the Torxdriver, remove the hinge and
plastic washer from the bottom right side
of the cabinet.
Bottom left
Plastic
washer
#
c. Reinstall the hinge and plastic washer to the
bottom left side ofthe cabinet.
~ TRANSFER CENTER
THE LEFT.
Do not remove this screw I I
HINGE BRACKET TO
a.
Remove the center hinge bracket by removing
the three Torx screws. NOTE:
Keep these
screws with the hinge bracket. They are
longer screws and will be used when
installing the hinge on the other side.
b.
Removethe three Torx screws tiom the center
left
side ofthe cabinet. Screw them into the
holes on the right side, which were uncovered
in Step (a) above.
Center left
I
I I Do not remove this screw
Place the center hinge bracket over the holes at
the center left side of the cabinet, insert the three
screws that were removed with the center hinge
bracket in Step (a) and tighten them.
@ TRANSFER TOP HINGE TO THE LEFT.
I
Interchange hinge and screws at top right
with screws at top left of cabinet. Do not tighten
screws on hinge side at this time.
I
❑TRAKSFER DOOR STOPS.
a. On
each door, move the metal door stop from
the right end to the left end.
b.
Move anyscrews from the left end to the
right end.
16
Loading ...
Loading ...
Loading ...