Loading ...
Loading ...
Loading ...
NOTE: MODELS WITH
THIS TYPE OF HANDLE
DO NOT REVERSE.
L
I
IMPORTANE Once you begin, do not move
the cabinet until the door-swing reversal is
completed.
When reversing the door swing
Read these instructions all the way
through before starting.
Handle parts carefully to avoid scratching
the paint.
Set screws down by their related parts to
avoid using them in the wrong places.
Provide a non-scratchin~ work surface for
the doors.
—
TOOLS REQUIRED
● T?O or T25 Torxdriver,
whichever your model requires
● Phillips screwdriver
● 5/16” hex socket driver
● 3/8” socket and ratchet
(a &point socket is recommended)
● Masking tape
● Putty knife or thin blade screwdriver
These instructions are for changing the
hinges fkom the right side to the lefi side.
If you ever want to change the hinges back to the
right side, follow these same instructions
(merely reverse all references to left and right).
REMOVE THE DOORS
❑GENERAL
a. Unplug the refrigerator from its
electrical outlet.
b. Empty all door shelves, including the
dairy compartment.
❑ REMOVE FREEZER DOOR
a. Tape door shut
with
masking tape.
b. With Torxdriver, remove
2 Torx screws that hold
the top hinge to cabinet.
c. Lift hinge straight up to
fkee
hinge pin from socket
in top of door.
d. Remove tape, tilt door
j
away from cabinet and lifl
it to free its bottom socket ——————
from hinge pin on center
hinge bracket.
e. Set door on non-scratching surface with
outside up.
❑ REMOVE FRESH FOOD DOOR.
a. Tape door shut
Plastic
I
with masking tape.
washer
*
I
b. Remove the hinge
+
I
pin with a 3/8”
Hinge
socket and ratchet.
pm
c. Remove tape
J
and tilt door away cfln~~
4
G;
from cabinet.
Remove and save
~+
bracket Q \
washer on hinge pin.
s
1
d. Iift door straight
I
up to free its bottom
socket from pin in
%
>
bottom hinge bracket.
Fresh food door
I
d
m
m
CAUTION:Do not let either door drop to the
floor. To do so could damage the door stop.
(continued next page)
15
Loading ...
Loading ...
Loading ...