Loading ...
Loading ...
Loading ...
42
The handset on the charger does not
charge or the battery discharges too
fast.
• Make sure the batteries are
inserted correctly.
• Make sure the handset is placed
properly on the charger. The LED
at the back of the handset ashes
once when charging.
• Make sure the docking tone setting
is turned on. When the handset is
placed correctly on the charger,
you can hear a docking tone.
• The charging contacts are dirty.
Disconnect the power supply rst
and clean the contacts with a
damp cloth.
• The battery is not fully recharged.
Leave the handset on the charging
cradle for at least 8 hours or until
the battery icon on the handset
stops scrolling and indicates full
bar.
• The batteries are old or defective.
Purchase and replace with new
rechargeable batteries with the
same specications.
No display
• Make sure the batteries are
charged.
• Make sure there is power and the
phone is connected.
The handset loses connection with
the base or the sound interrupts
during a call.
• The handset is nearly out of range.
Move it closer to the base station.
• Re-register the handset to the
base station.
No dialing tone/no free line.
• Check your phone connections.
• The handset is out of range. Move
it closer to the base station.
• The handset is in [searching] or
[Unavailable] status. Register the
handset to the base station.
No docking tone.
• The handset is not placed properly
on the base station/charger.
• The charging contacts are dirty.
Disconnect the power supply rst
and clean the contacts with a
damp cloth.
[Voicemail] is displayed on the
handset. What do I do?
You receive the [Voicemail] alert
when you have new voice messages
stored in your network. The voice mail
service is managed by your service
provider but not on the phone itself.
Contact your service provider for the
settings.
Loading ...
Loading ...
Loading ...