Loading ...
Loading ...
Loading ...
15 0800 862 0453
CARE &
MAINTENANCE
CLEANING
1 Separate all parts.
2 Hand-Washing
Wash the pitcher, lid, and Stacked Blade
Assembly in warm, soapy water using a
dishwashing utensil with a handle to avoid
direct contact with the blades. Exercise care
when handling Stacked Blade Assembly as
the blades are sharp. Thoroughly rinse and
air-dry all parts.
Dishwasher
The pitcher, lid, and Stacked Blade
Assembly are dishwasher safe. It is
recommended that the lid and Stacked
Blade Assembly be placed on the top rack
of the dishwasher. Ensure the Stacked
Blade Assembly is removed from the
pitcher before placing in the dishwasher.
Exercise care when handling Stacked Blade
Assembly.
Motor Base
Turn off the unit and unplug the motor base
before cleaning. Wipe motor base with a
clean, damp cloth.
Clean the touchscreen with a soft cloth,
such as microfibre, to prevent scratching. To
remove residue from the touchscreen, you
may use an all-purpose cleaner.
Never spray the base or touchscreen with
water or other liquids.
DO NOT use abrasive cloths/pads/brushes
to clean the base or touchscreen, as this
can dull or scratch the surface.
STORING
Store your unit upright with the Stacked Blade
Assembly inside the pitcher and the lid secured
on top.
DO NOT stack items on top of the unit. Store
any remaining attachments alongside the unit
or in a cabinet where they will not be damaged
or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system
that prevents damage to the motor and drive
system should you inadvertently overload
it. If the unit is overloaded, the motor will be
temporarily disabled. Should this occur, follow
the reset procedure below.
1 Unplug the unit from the electricaloutlet.
2 Allow the unit to cool for approximately 15
minutes.
3 Remove the lid and Stacked Blade
Assembly from the pitcher. Empty the
pitcher and ensure no ingredients are
jamming the Stacked Blade Assembly.
4
Re-install the pitcher onto the base and plug
the
unit
into the electrical outlet.
5 Once the unit has been reset, you may
resume using it, making sure to not exceed
the maximum capacities.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service on 0800 862 0453.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
please visit ninjakitchen.eu or contact
Customer Service on 0800 862 0453.
Loading ...
Loading ...
Loading ...