Arendo 722302704 User Manual

Loading ...

33English

1. Remove the lid of the milk frother.

2. Insert the desired aachment (srrer or frother).

3. Pour milk into the container. Ensure that you do not exceed the maximum

level: Frothing 175 ml (" ";) Srring 250ml (" ").

4. Close the lid of the milk container and ensure that it is xed correctly.

5. Place the milk container on the base unit. Connect the power cable to a

properly installed socket.

6. Press the sensor buon (" ") on the front of the base unit of the milk

frother to switch on the appliance.

Press the sensor buon "ON/OFF" on the front of the base unit to select the desi-

red mode. An audible signal conrms the selecon. And the ( ) symbol starts

glowing in red on the buon (heang plate switched on). If the ( ) symbol is

blue, then the heang plate is switched o and the content is not being heated.

If the appliance is started, then the milk frother is automacally switched o aer

60-240 seconds. The container is subsequently lled with hot or cold milk froth de-

pending on whether you had switched the heang plate on or o ("red" or "blue"

mode). If you want to switch o or stop the appliance during operaon, press the

sensor buon (" ") once again.

Loading ...

Arendo 722302704 Milk Frother incl. Removable Glass Top