Loading ...
Loading ...
Loading ...
7
OPERATING INSTRUCTIONS
(CONT’D)
Temperature Mode
• The temperature mode controls the heater’s thermostat setting.
• Use Up arrow button or Down arrow button to scroll through the pre-set temperature setting. The
temperature setting range is 65ºF (18ºC) to 90ºF (32ºC), HI (High) and OF (OFF).
• Hold down the Up arrow button and Down arrow button for 5 seconds to toggle between 5°F (3°C)
increments and 1°F (1°C) increments when setting the temperature. The unit will beep to indicate that the
change has taken place. The factory default temperature is 5°F (3°C) increments.
Note: This option is only available if using the control panel.
• Hold down the mode button for 3 seconds to toggle between Fahrenheit and Celsius. A small “F” or “C” will
display next to the temperature.
Note: This option is only available if using the control panel.
• When the ambient temperature is higher than the set temperature, heater will turn off automatically.
Timer Mode
• The timer mode should be used to set the countdown for the unit’s main power.
• Use Up arrow button or Down arrow button to scroll through the timer settings,
0.0, 0.5,1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0.
• When the timer reaches zero, the heater and power will turn off automatically.
Flame Brightness Mode
• The flame brightness mode should be used to set the flame brightness.
• Use Up arrow button or Down arrow button to scroll through the flame brightness settings: F0 (lowest), F1,
F2, F3, F4, F5 (brightest).
Additional Function
• Heater Lock: When the unit is ON, press and hold the POWER button for 10 seconds to activate a lock
feature on the heater. The unit will flash “E3” 3 times and the heater function will lock; all other buttons/
functions will work as normal. To unlock the heater, simply press and hold the POWER button for another 10
seconds.
Note: This option is only available if using the control panel.
Loading ...
Loading ...
Loading ...