Loading ...
Loading ...
Loading ...
Lynx Side Burners
29
MOUNTING THE SIDE BURNER TO A CART
Remove the right side shelf. The side burner has brackets on the left side which connect to the
same pins the side shelf was mounted on. Mount the side burner to the grill side shelf mounting
pins. When the side burner installation is complete, the side shelf you just removed can be
mounted to the right side of the side burner in the same manner in which it was mounted to the
grill.
LP GAS HOOK-UP (see diagram on page 10)
1. Remove the rear access panel ( cart models only -4 screws)
2. Remove the propane hose assembly.
3. Remove the 90 degree elbow from the BBQ manifold.
4. Assemble 1/2” TEE fitting (provided) to the BBQ manifold.
5. Assemble 15/16” MIP Flare x 1/2”MIP to the TEE outlet closest to the side burner.
6. Assemble SS flex hose to the fitting just assembled.
7. Assemble 15/16” MIP Flare x 1/2” FIP to the 1/2” Male-Female elbow already
installed on the side burner manifold.
8. Assemble 1/2” MIP x 3/8” Flare Fitting to 1/2” Close Nipple.
9. Assemble propane hose / regulator assembly to fitting just assembled.
NATURAL GAS GAS HOOK-UP (see diagram on page 11)
1. Remove the rear access panel ( cart models only -4 screws)
2. Remove 90 degree elbow and natural gas regulator from BBQ manifold.
3. Assemble 1/2” TEE fitting (provided) to the BBQ manifold.
4. Assemble 1/2” MIP x 3/8” to the TEE outlet closest to the side burner.
5. Assemble SS flex hose to the fitting just assembled. Assemble other end to the 1/2”
MIP x 3/8” fitting on the side burner manifold.
6. Assemble 1/2” close Nipple to other side of the 1/2” TEE.
8. Assemble NG regulator to 1/2” close Nipple. (observe gas flow directional arrow)
9. Assemble gas supply piping to reulator.
10. Ensure a gas shut-off valve is located upstream from the regulator.
SPECIAL NOTES:
A) Use pipe dope or teflon tape on all black iron pipe fittings. Do not apply sealant on
first two threads of a fitting.
B) Do not
put sealant on any male end of flare fittings.
C) Check all joints for gas leaks. - see page 6 for instructions.
Connecting Side Burners
Rev. 11/2004
Loading ...
Loading ...
Loading ...