Loading ...
Loading ...
Loading ...
2 3
Product Description
1. Counterweight
2. Anti-skating Stick
3. Turntable Platter
4. Tonearm Lift Lever
5. Tonearm Rest
6. 33/45 RPM Selector
7. Tonearm
8. Stop/Start Dial
9. Cartridge
1
2
3
4
5
6
7
8
9
1110 12 13 14 1516 17 18
L
R
USB-PC
DC IN 12V
PHONO
LINE
ON
OFF
19
10. Lid
11. Lid Hinge
12. Ground Connector
13. PHONO & Line Out Jacks
14. PHONO & Line Out Switch
15. Anti-skating Weight
16. USB-PC Port
17. AC-DC Power Jack
18. Bluetooth Indicator
19. Power Switch
Upon opening the turntable’s package, locate all of the following included items.
1) Turntable Unit
2) Power Adapter
3) Lid
4) Counterweight
5) Anti-skating Weight
6) Platter with Belt
7) 45 RPM Adaptor
8) Slip Mat
9) Cartridge Alignment Protractor
10) USB-PC Cable
11) Instruction Manual
This turntable is supplied with a factory-fitted cartridge that’s already adjusted.
Note: Instructions provided in this manual for adjusting the cartridge are provided in
case the cartridge is replaced at a later date by a different model.
Installing the Lid
Install the
Lid
carefully over the hinge prongs.
Turntable Platter and Belt Setup
1. Set the platter on the spindle.
• Make sure that the platter is fully seated on the spindle.
PlatterOpening
Motor pulley
Spindle
2. Place the belt on the motor pulley.
• Align one of the platter openings with the motor pulley, and, while pulling both
ends of the red ribbon that comes attached to the belt, place the belt on the
motor pulley, as per the diagram. When doing this, be careful not to twist the belt.
Belt
Motor pulley
Red ribbon
Straight Twisted
Loading ...
Loading ...
Loading ...