Loading ...
Loading ...
Loading ...
• Start / Pause / Cancel button is not pressed.>>>
*Press Start/Pause/Cancel
button.
• Washing machine has switched to self protection mode due to a supply
problem (line voltage, water pressure, etc. >>>
Press and hold On/Off button
for 3 seconds to reset the machine to factory settings. (See. “Cancelling the
programme”)
• Some water may remain in the product due to the quality control processes in
the production. >>>
This is not a failure; water is not harmful to the machine.
• There is a problem with hoses or the pump filter. >>>
Be sure the seals of the
water inlet hoses are securely fitted. Attach the hose to the tap tightly.
• Pump filter is not closed securely. >>>
Make sure that the pump filter is closed
securely.
• Tap is turned off. >>>
Turn on the taps.
• Water inlet hose is bent. >>>
Flatten the hose.
• Water inlet filter is clogged. >>>
Clean the filter.
• Loading door is not closed. >>>
Close the loading door.
• Water drain hose is clogged or twisted. >>>
Clean or flatten the hose.
• Pump filter is clogged. >>>
Clean the pump filter.
• Machine is standing unbalanced. >>>
Adjust the feet to level the machine.
• A hard substance has entered into the pump filter. >>>
Clean the pump filter.
• Transit bolts are not removed. >>>
Remove the transit bolts.
• Laundry quantity in the machine is too little. >>>
Add more laundry to the
machine.
• Machine is overloaded with laundry. >>>
Take out some of the laundry from the
machine or distribute the load by hand to balance it.
• Machine is in contact with a rigid surface. >>>
Make sure that the machine is
not contacting anything.
• Machine has stopped temporarily due to low voltage. >>>
It will resume
running when the voltage restores to the normal level.
• Draining hose is not at adequate height. >>>
Connect the water draining hose
as described in the user manual.
• The water level is not visible from outside of the washing machine. This is not
a failure.
41
EN
Loading ...
Loading ...
Loading ...