Loading ...
Loading ...
Loading ...
7. There may be a short pause prior to coffee
being dispensed. The entire brew process
lasts for approximately 1 minute and ends
with a burst of air to remove all liquid from
the K-Cup
®
pack.
CAUTION: There is extremely hot water in
the K-Cup
®
Pack Holder during the brew
process. To avoid risk of injury, do not lift the
Handle or open the K-Cup
®
Pack Assembly
Housing during the brew process.
8.
The end of brew is indicated by “KEURIG
BREWED ENJOY”.
9. Lift the Handle, remove and dispose
of the used K-Cup
®
pack.
CAUTION: K-Cup
®
pack will be hot.
10.
Enjoy your first cup of Keurig Brewed
®
gourmet coffee, tea or hot cocoa!
11. Your Brewer may display “HEATING
PLEASE WAIT” as it heats water for the
next brew cycle.
Ready to Brew Your First Cup
1. The LCD Display will be in its idle state (fig. 4).
2. Lift the Handle. The K-Cup
®
Pack Holder
will open toward you (fig. 5).
3. Select a K-Cup
®
pack.
NOTE: Do not remove the foil lid
or puncture the K-Cup
®
pack.
4. Place a K-Cup
®
pack in the
K-Cup
®
Pack holder (fig. 6).
CAUTION: There are two sharp needles that
puncture the K-Cup
®
pack, one above the K-Cup
®
Pack Holder and the other in the bottom of the
K-Cup
®
Pack Holder. To avoid risk of injury, do
not put your fingers in the K-Cup
®
Pack Assembly
Housing.
5.
Lower the Handle to close the Lid over the
K-Cup
®
Pack Holder. (When it is closed com-
pletely, the BREW Button will flash up to
60 seconds.)
6. Place a mug on the drip tray and select
your brew size (fig. 7), then press BREW (fig. 8).
NOTE: If you do not press BREW within 60
seconds the Brewer will return to its idle state
and the Brew Button will cease to flash to prevent
accidental activation. Re-activate by raising the
handle fully and then closing it.
fi g.
4
fi g.
6
fi g.
5
fi g.
7
7
Select
Brew Size
8 OZ.4 OZ.
6 OZ. 10 OZ.
fi g.
8
12:30 PM
Ready
Choose Your
K-Cup
®
Portion Pack
& Lift Handle
WATER
LEVEL
Español Français
Loading ...
Loading ...
Loading ...