Loading ...
Loading ...
Loading ...
Care & use/ FIre PIT InsTallaTIon
|
7
Press the ignition button and verify a spark is present at the spark electrode at the burner
assembly. If you do not see or hear a spark, please refer to the trouble shooting section of this
manual. If the ignition spark is present, proceed to the nest step, addition of burner media
Media installation
bURnER AnD IGnITIOn COnTROlS ...continued
Step 2
STEP1: Install the burner pan as described above
STEP2: Add lava rocks and spread evenly to cover the entire burner assembly, and an additional ½ - 1” deep.
STEP3: Add river rocks in a single layer, to cover the lava rock
Your Fire Pit needs burner media in order to create realistic, natural looking flame effects. Follow the instructions
outlined below to create safe and pleasing fire effects.
InstallIng the lP CylInder
The LP Gas cylinder, or tank, must comply with U.S Department of Transportation (D.O.T.) Specifications for LP Gas
Cylinders or the Standard for Cylinders, Spheres and Tubes for Transportation of Dangerous Goods an Commission
CAN/CSA-B339. The cylinder must be protected with a listed overfill preventtion device and provided with a connec-
tion device compatible with the appliance connector. Failure to meet this requirement may create a hazardous condi-
tion resulting in personal injury, death or damage to personal property, and may pose a risk of fire or explosion.
WarnIng
Loading ...
Loading ...
Loading ...