Loading ...
Loading ...
Loading ...
6
|
Care & use/ FIre PIT InsTallaTIon
STEP1: Unpack the table top and the base. Remove all packing materials, tie down straps and any other packaging.
STEP2: Place the fire pit base on a flat firm surface. The Fire Pit must be on solid ground or pavers so it will not sink over time.
STEP3: With the help of an assistant, place the table top on top of the base, making sure the table top is centered properly.
SEDOnA FIRE PIT ASSEMblY InSTRUCTIOnS
Burner and IgnItIon Controls ...continued
Install burner and burner pan in the table top opening. This can be accomplished In
one or two ways. Before dropping the burner pan into the enclosure, connect the
quick disconnect device to the burner, and the ignition wire from the igniter module
to the electrode. As an alternative you can install the burner pan into the table top,
and working from the base access door, connect the quick disconnect hose gas
supply and the ignition electrode wire. Do not add the burner media until you check
the spark ignition in the next step.
Quick Disconnect and Igniter Connection
Ignition Wire Connector
Step 1
Loading ...
Loading ...
Loading ...