Loading ...
Loading ...
Loading ...
Page 19 of 22
MAINTENANCE
CLEANING
Please shut off the unit and unplug from the mains before cleaning or performing any
maintenance
CLEAN THE SURFACE
Clean the plastic housing with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause
irreversible damage.
AIR FILTER CLEANING
a) Clean the air filter every 2 weeks. If the air filter is blocked with dust, the unit’s performance
will be significantly affected.
b) Pull out lightly the filter as shown below
c) Wash the air filter by immersing it in warm (about 40°C) water with a neutral detergent.
d) Rinse it and then dry it thoroughly.
e) Carefully re-install the air filter
END OF SEASON MAINTENANCE：
1. Pull out the plug from the drainage hole and empty the internal tank. You can also drain the
water by leaning the unit.
2. Then switch the unit to low fan mode in cooling mode with the desired room temperature
set above the rooms temperature.
3. Keep the unit in this mode for half day - until the conduit is dried. Doing this helps to keep
the inside of the unit dry and prevents mould developing
4. Turn off the unit and pull out the plug.
5. Separate the vent pipe and store it safely.
6. Cover the unit and keep it in a dry place.
7. Take the batteries out of remote control and store, or dispose of them safely
Loading ...
Loading ...
Loading ...