Loading ...
Loading ...
Loading ...
Make sure the open circuit voltage of the solar panel does not exceed 25V or fall short of 12V.
CAUTION
The solar recharge time is highly dependent on solar irradiance and ambient temperature.
NOTE
Recharging via AC/DC Adapter
The PHOENIX 300 will begin to recharge automatically and one of the Battery Level LED Indicators will flash.
The flashing LED indicates the unit’s current battery level.
Plug your PHOENIX 300 into a wall outlet through the DC Input Port using the included AC/DC Adapter.
Electrical shock can occur if the Solar Panle Connectors to DC Adapter Cable is damaged or
frayed. DO NOT use a damaged or frayed cable to recharge your PHOENIX 300.
Recharging via USB-C PD Wall Charger
The PHOENIX 300 is designed to be recharged via either a USB-C wall charger or a USB-A wall charger.
However, for optimal recharging performance, it is highly recommended to recharge your PHOENIX 300 using
a USB-C PD wall charger (not included) with a high power rating.
The PHOENIX 300 will begin to recharge automatically and one of the Battery Level LED Indicators will flash.
The flashing LED indicates the unit’s current battery level.
Connect the USB-C PD Port of your PHOENIX 300 to a USB wall charger (not included) using the included
USB-A to USB-C Cable or USB-C to USB-C Cable and plug the USB wall charger into a wall outlet.
Electrical shock can occur if the power supply cable of AC/DC Adapter is damaged or frayed.
DO NOT use a damaged or frayed cable to recharge your PHOENIX 300.
WARNING
D-TAP/CIG
USB
AC LIGHT
IN/OUT
TYPE-C 60W PD
DC IN
D-TAP
USB
WARNING
- 09 -
Loading ...
Loading ...
Loading ...