Loading ...
Loading ...
Loading ...
1/8 in
3 mm
2-1/8"
54 mm
1/8"
3 mm
1"
25 mm
1/8"
3 mm
2-1/8"
54 mm
1/8 in
3 mm
1"
1/8"
3 mm
2-1/8 in
54 mm
1/8"
3 mm
1"
25 mm
1/8"
3 mm
2-1/8"
54 mm
1/8"
3 mm
1 in
25 mm
Drill holes in door
Select the template that allows you to place
the template on the EXTERIOR side of door.
Fold template along fold line and place fold
line along the edge of door. Place centerline
approximately 38 in (97 cm) from the oor.
Mark hole on the face of the door.
Select desired backset before marking
hole. If there is another hole in the
door, or if you are drilling double
doors, make sure to keep the backset
consistent.
Mark hole on the edge of the
door. Select door thickness before
marking hole.
Drill from one side until the point
of drill just breaks through, then
complete hole from the other side
to prevent splintering.
Exterior
Floor
*Call Kwikset to order a
service kit for 2-1/4 in
(57 mm) thick doors.
or
35 mm–57 mm*
54 mm
1 in
25 mm
B
A
B
C
D
A
C
Through door
2 in [51 mm] deep
2 in [51 mm] deep
Preparing Your Door
Use template to mark holes on door
1-3/8 in–2-1/4 in
2-1/8 in
2-3/4 in (70 mm)
2-3/8 in (60mm)
in
For consumers requiring the door
prep template, please visit:
Drilling instructions
Loading ...