Loading ...
Loading ...
Loading ...
6 7
USING THE TIMER
LectroFan EVO plays continuously, but you can use the optional timer to gently
turn it o automatically. Tap the timer button to begin. You’ll hear a short rising
tone, indicating that the timer has been set for one hour. Each time you tap it,
another hour will be added. When you hear a short falling tone, the maximum
of eight hours has been reached.
To cancel the timer, turn the EVO o, and then on again.
DISABLING AUTOMATIC POWER-ON
If you prefer that the LectroFan EVO not turn on immediately, you can disable
this feature:
1. Turn o the LectroFan EVO with the power button.
2. Press and hold the volume down button.
3. While you’re still pressing the volume down button, press and release
the power button.
RESTORING FACTORY SETTINGS
Restoring factory settings will set the LectroFan EVO to turn on automatically, and
reset the default sounds and volume level. To restore the factory settings, turn o
the LectroFan EVO then press and hold the power button until you hear a tone.
USING THE AUDIO OUTPUT CONNECTOR
Your LectroFan EVO has a 3.5mm analog audio jack which you can use to send
sound to a pillow speaker, portable speaker, headphones, or any audio device
which uses a 3.5mm plug. When you connect an external speaker, the built-in
speaker is turned o.
As with any audio source, be sure to keep the volume at a comfortable level
when using headphones or ear buds.
+
Loading ...
Loading ...
Loading ...