Loading ...
Loading ...
Loading ...
8
Using Your Appliance:
SELECTING A WASH PROGRAM:
1) Press and hold the “ON/OFF” button to turn on your machine.
2) Refer to the Pre-Programmed Wash Cycles table on the previous page, to select a wash program suitable
for your needs.
3) Press the “PROGRAM SELECTION” button until the number of the program you selected appears in the
display.
4) Press the “START / PAUSE” button to activate the wash program.
5) If you must add an item during the wash cycle, press Start/Pause button, open the door, add your item,
close the door of your appliance and press Start/Pause button to continue the activated wash program.
6) It is not recommended to open the door of your machine while the activated wash program is running. Even
so if the door is opened and not closed within approximately 4 seconds, the unit will not continue the wash
program. In this case, you must close the door and press the “START/PAUSE” button again to continue
the wash program.
CANCELLING A WASH PROGRAM:
1) Press and hold the “START/PAUSE” button for approximately 3 seconds.
2) The display will show “1” to confirm cancellation of the wash program.
Note: If the door is opened during the cancelling process, the door must be closed within 4 seconds to
continue the cancelling process.
If the door is not closed during the 4 seconds, close the door and simply press the “START/PAUSE” button
again to continue the cancelling process of the wash program.
SELECTING AN OPTIONAL WASH OPTION:
1) Select the desired Pre-Programmed Wash Program as directed above.
2) Before pressing the “START/PAUSE” BUTTON, press the “OPTIONS” button.
3) Continue to press until the indicator light of the option (Half-Load or Hi-Temp) you desire is illuminated.
4) Press Extra button in order to choose from Sanitize / Extra Rinse / Extra Dry options.
Close the door of your appliance and press the “START / PAUSE” button to activate the wash program.
Wash Options:
HALF LOAD:
This option allows you to save energy and wash a smaller load. This option should be used when washing
less than a full load or in the event you do not want to load the washer and run later when completely loaded.
SANITIZE:
When the Sanitize option is selected, the water temperature will be maintained at 156ºF/69ºC (maximum). The
maximum temperature may not be reached if the incoming water temperature is not adequate.
Residential dishwashers are not intended for licensed food establishments or Commercial applications.
HI-TEMP:
When the HI-Temp option is selected, the water temperature will be maintained at 140ºF/60ºC (maximum).
The maximum temperature may not be reached if the incoming water temperature is not adequate.
Residential dishwashers are not intended for licensed food establishments or Commercial applications.
EXTRA DRY:
When the EXTRA DRY option is selected, the machine changes the water temperature for each program and
the extra dry is performed.
Loading ...
Loading ...
Loading ...