Loading ...
Loading ...
Loading ...
34
BREWER DOES NOT HAVE POWER
• Plug the brewer into an independent outlet without dimmer control.
• Check to be sure that the brewer is plugged in securely.
• Plug the brewer into a dierent outlet.
• Reset your home’s circuit breaker if necessary.
• Press and hold the Power Button and ensure the Touch Display is illuminated.
BREWER WILL NOT BREW
• After placing a pod in the Pod Holder, make sure the Handle is lowered completely and
the Touch Display displays the appropriate brew screen. Follow the brewing instructions
in SECTION 1 (refer to pages 18 – 19).
• If the Touch Display indicates “More Water Please.” add water to the Water Reservoir or
make sure the Water Reservoir is seated properly in its Base.
• If the Touch Display indicates “More Water Please.” even after refilling, remove the Water
Reservoir and empty the water. Then thoroughly clean (refer to page 25). Fill the Water
Reservoir to the MAX FILL line, return it to the brewer and ensure it is seated properly in
its Base.
• The Pod Holder may need to be cleaned (refer to pages 26 – 27) or the brewer may need
to be descaled (refer to pages 31 – 32).
• If you have completed the above procedure two times and this situation persists,
contact Customer Service at 1.866.901.BREW (2739).
BREWER BREWS ONLY A PARTIAL CUP
• Clean the Pod Holder if necessary (refer to pages 26 – 27).
• The Water Reservoir may have been removed during brewing. Replace the Water
Reservoir and perform a cleansing brew (refer to page 17) without a pod.
• Descale the brewer (refer to pages 31 – 32).
• If you have repeated the descale procedure on your brewer two times and it is still only
brewing a partial cup, contact Customer Service at 1.866.901.BREW (2739).
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...