Loading ...
Loading ...
Loading ...
FUNZIONAMENTO
I
74
WARNINGSGB
Cleaning and maintenance must not be carried out by children without proper supervision.
If the power cord is damaged, it must be replaced by a qualied service centre or technician only.
The electrical installation must have a breaker upstream from the appliance which ensures that
all poles are disconnected with a contact gap of at least 3mm.
CAUTION: The hob protection devices must be only those designed by the appliance manufacturer
or those indicated as suitable in the manufacturers instructions or the hob protection devices
incorporated in the appliance.
The use of inappropriate protection devices may provoke accidents.
During the installation the equipment must be connected to a power source whose system
impedance is matched to a value of 0.005+j0.005[Ohm].
Do not seal the area between the glass and the worktop with silicone because should the cooktop
need to be replaced, the glass could break during removal.
The unit’s installation and electrical connection to the power grid must be carried out by qualied
service technicians only. The device’s electrical safety can be guaranteed solely if a regular ground
connection is provided for the cooking top. If in doubt, have the electrical system checked by
a qualied electrician. Do not connect the cooking top to the mains using extension cords or
multiple sockets, since they will not guarantee the required safety (e.g. risk of overheating).
Prior to connecting the cooktop, compare the connection specications (voltage and fre quency)
indicated on the unit’s identication nameplate with those of the mains electricity supply.
These specications must absolutely correspond, otherwise the unit may be subject to damage.
Contact an electrician if in doubt.
D
isconnect the unit from the mains when carrying out installation work, maintenance or repairs.
Comply with all air discharge regulations.
CAUTION: If the surface is cracked, switch o the appliance to avoid the possibility of electric
shock.
Never open unit’s outer casing. Any contact with live parts or the modication of electrical or
mechanical parts can cause operating abnormalities.
Loading ...
Loading ...
Loading ...