Loading ...
Loading ...
Loading ...
CLOCK
HORLOGE
START/
ON
DÉPART
START/
ON
DÉPART
TIMER
MINUTERIE
Using the clock, timer
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of day
cannot be changed during a timed baking
or seIf-cleaning cycle.
Touch the CLOCK pad twice.
Touch the + or - pads.
If the +or - pads are not touched within
one minute after you touch the CLOCK pad,
the display reverts to the original setting.
If this happens,. touch the CLOCK pad and
reenter the time of day.
Touch the START/ON pad until the
time of day shows in the display. This
enters the time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
CLOCK pad. The time of day shows until
another pad is touched.
To Turn Off the Clock Display
If you have several clocks in your kitchen,
you may wish to turn off the time of day
clock display on your range.
Touh the CLOCK pad once to turn
off the time of day display. Although
you will not be able to see it, the clock
maintains the correct time of day.
To Set the Timer
The timer does not control oven operations.
The maximurn setting on the timer is 9 hours
and 59 minutes.
Touch the TIMER pad.
Touch the + or - pads until the
amount of time you want shows in
the display. The maximum time that
can be entered in minutes is 59.
Times more than 59 minutes should
be changed to hours and minutes.
If you make a mistake, touch the TlMER pad and
begin again.
Touch the CLOCK pad again to recall
the clock display.
Touch the START/ON pad. The time
will start counting down, although
the display does not change until one
minute has passed.
When the timer reaches :00, the
control will beep 3 times followed by
one beep every 6 seconds until the
TIMER pad is touched.
Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The OFF pad does not affect the
timer
1
2
1
2
3
1
2
3
4
16
Safety Instructions
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting Tips
Consumer Support
Loading ...
Loading ...
Loading ...