Loading ...
Loading ...
Loading ...
EliteStyle™
N85AP
Auto-Off
5
Using Your Warming Throw Control:
1 To turn on the throw press the button in the middle of the control.
The indicator light will glow, depending on which setting the warming throw
is set, and the warming throw will begin to warm.
CAUTION: ALWAYS turn the warming throw “OFF” and disconnect the
power cord from the outlet when not in use.
2 To turn the warming throw OFF press the button through the different
settings until the temperature setting lights are not glowing.
When setting up your warming throw, be sure to follow the steps below in order.
1 Locate the warming throw’s information label near the module.
2 Connect the cord into the module at the bottom of the warming throw until
the plastic hinges click into place.
CAUTION: Cord must be COMPLETELY CONNECTED. A risk of fire could result
from a loose connection.
Warming Throw Setup
For questions or support, please visit: www.sunbeam.com
3 Plug the [warming throw] power cord into a 110-120 volt wall outlet.
CAUTION: Do not plug main power cord into the wall outlet until you have completely set up
your heated product per the instructions.
• Disconnect power cord from wall before detaching control from heated product.
• Always make sure cords and controls are NOT trapped or pinched between bed slats, mattress, springs,
against wall, foot board or bed frame, or between furniture, walls or chairs.
• Do not wrap control in throw when in use.
• Do not use with generator power.
CAUTION: Do not attempt to force the plug. This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electrical shock, this plug is intended to fit only one way into an outlet.
If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
IMPORTANT
Module
Control
Power
Cord
Flag T a g
Throw Cord
Connector
Throw Cord
Label
Module
Control
Power
Cord
Flag T a g
Throw Cord
Connector
Throw Cord
Label
2
1
3
2
1
3
If there is a flashing light on
your control, see page 8.
PrimeStyle
™
M85P
Non Auto-Off
PrimeStyle
™
AO
M85AP
Auto-Off
Features:
• 3 TEMPERATURE SETTINGS – select your personal comfort level
• SILENT OPERATION – no clicking when adjusting the temperature
• SOLID STATE – for accurate and consistent heat control
• EASY OPERATION – electronic control for easy operation
• EASY GRIP – ergonomic control for easy operation
• AUTO-OFF (Selected models only) – 3 hour Auto-Off operation
(see page 1)
Control Features
2
Loading ...
Loading ...
Loading ...