Loading ...
Loading ...
Loading ...
Changing a light bulb
IMPORTANT: BEFORE ATTEMPTING TO CHANGE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
13
o Prior to touching the light bulbs ensure they are cooled down.
Using a flat-headed screwdriver, gently prise the edge of the light
unit out of the fixture, as shown in the picture below. Please note
that it may be easier to use two screwdrivers.
o Once the light unit has been released from the fixture, gently
pull out the light unit.
o There are wires connected to the back of the light unit. Once you
have pulled out the light unit and wires a short distance, you can
disconnect the wires by pulling them out of the connectors.
IMPORTANT: It is not possible to replace the bulbs individually.
It will be necessary to obtain the bulbs, bulb holders and wiring as a
complete part. This is available from our Spares Department.
Loading ...
Loading ...
Loading ...