Loading ...
Loading ...
Loading ...
English 13
2. Fill the tank with clear water.
3. Close the cover.
4. Place the water tank on the high-
pressure washer.
Operation
Note
Running the high-pressure washer
dry for more than 2 minutes leads to
damage of the high-pressure pump.
If the high-pressure washer does not
build up pressure within 2 minutes,
switch off the high-pressure washer
and proceed in accordance with the
instructions in chapter Trouble-
shooting.
Charging the battery
Note
If the motor or the battery is hot, please
wait for cooling down.
1. Turn the high-pressure washer off.
2. Connect the power cable to the pow-
er supply.
3. Open the cover of the charging
socket.
4. Plug the charging cable into the
charging socket located on the high-
pressure washer.
The LED of the high-pressure washer
indicates the charging process:
b.b.b.
a.
LEDs Charged capacity
3 blinking 0 - 30%
1 always on
2 blinking
30 - 70%
2 always on
1 blinking
70 - 95%
3 always on > 95%
Loading ...
Loading ...
Loading ...