Gaggia VIVA STYLE User Manual

Loading ...

English

First installation

1 Remove all packaging material from the machine.

2 Place the machine on a table or work surface away from the tap, from the sink and from sources of

heat.

Note: leave at least 15 cm of vacant space at the top, at the rear and at the sides of the machine

(g. 1).

3 Remove the water tank lid, then remove water tank from the machine (g. 2).

4 Rinse the water tank. Fill the tank with fresh water up to the maximum level (MAX) graduation mark

(g. 3).

5 Place the water tank in the machine once again and push it downwards until the reference marks

are visible (g. 4).

6 Place the water tank lid on the machine.

Priming the circuit

When using the machine for the rst time, or after the machine has not been used for more than 2

weeks, proceed as follows:

1 Place a container under the pannarello with the selection knob at the central standby position

(g.8). Turn the hot water/steam knob counter-clockwise (g. 5).

2 Insert the plug into the wall power socket and set the power button on "I" to switch on the machine

(g. 6).

- The power-on light will come on.

3 Turn the selection knob up to the coee position (g. 7).

- Hot water will ow out from the pannarello.

Note: To empty the container when full, move the selection knob to stand-by position (g.8) and

turn the hot water/steam knob clockwise to stop dispensing.

4 Once the water tank is empty, move the selection knob back to the central standby position (g. 8).

5 Turn the hot water/steam knob clockwise. Remove the container (g. 9).

Note: when using the machine normally, to prime the circuit you only need to dispense just one

cup of water from the pannarello.

Manual rinse cycle

Note: the circuit needs to be primed should the the tank be completely empty.

1 Rinse the water tank. Fill the tank with fresh water up to the maximum level (MAX) graduation mark

(g. 3).

2 Place the water tank in the machine once again and push it downwards until the reference marks

are visible (g. 4).

3 Place a container under the classic pannarello and turn the hot water/steam knob counter-

clockwise (g. 5).

4 Turn the selection knob up to the coee position (g. 7).

- Let the machine dispense water until the water tank is empty.

5 Move the selection knob back to the standby position (g. 8) and turn the steam/hot water knob

clockwise.

6 Fill the tank with fresh water up to the maximum level (MAX) graduation mark.

4219-465-04061 MAN. GAG. VIVA WEU.indd 12 13/07/2020 14:36:37

Loading ...

Gaggia VIVA STYLE Espresso Machine