Loading ...
Loading ...
Loading ...
Functional requirements
Only when the brake pedal is depressed is it
possible to change from selector lever posi-
tion P to another selector lever position.
Depending on the transmission version, the
engine may have to be running too.
The selection lever position P cannot be
changed until all technical requirements are
met.
Engaging selector lever position D, N,
R
A selector lever lock prevents the following
faulty operation:
– Unintentional shifting into selector
lever position R.
– Unintentional shifting from selector
lever position P into another selector
lever position.
1. Press and hold the button to release the
selector lever lock.
2. With the driver's safety belt fastened,
briefly push the selector lever in the de-
sired direction, past a resistance point,
if needed. The selector lever automati-
cally returns to the center position when
released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is to roll
without its own power for a short distance,
for instance in a car wash, or be pushed.
Engaging selector lever position N
NOTICE
Selector lever position P is automatically
engaged when the ignition is switched off.
There is a risk of damage to property,
among other potential damage. Do not
switch ignition off in car washes.
Seite 118
CONTROLS Driving
118
Online Edition for Part no. 01405A2C359 - II/21
Loading ...
Loading ...
Loading ...